Linux version 2.6.21.5 (root@midas) (gcc version 4.1.2) #2 Tue Jun 19 15:22:48 CDT 2007 BIOS-provided physical RAM map: sanitize start sanitize end copy_e820_map() start: 0000000000000000 size: 00000000000a0000 end: 00000000000a0000 type: 1 copy_e820_map() type is E820_RAM copy_e820_map() start: 00000000000f0000 size: 0000000000010000 end: 0000000000100000 type: 2 copy_e820_map() start: 0000000000100000 size: 0000000007f00000 end: 0000000008000000 type: 1 copy_e820_map() type is E820_RAM copy_e820_map() start: 00000000ffe00000 size: 0000000000200000 end: 0000000100000000 type: 2 BIOS-e820: 0000000000000000 - 00000000000a0000 (usable) BIOS-e820: 00000000000f0000 - 0000000000100000 (reserved) BIOS-e820: 0000000000100000 - 0000000008000000 (usable) BIOS-e820: 00000000ffe00000 - 0000000100000000 (reserved) 0MB HIGHMEM available. 128MB LOWMEM available. Entering add_active_range(0, 0, 32768) 0 entries of 256 used Zone PFN ranges: DMA 0 -> 4096 Normal 4096 -> 32768 HighMem 32768 -> 32768 early_node_map[1] active PFN ranges 0: 0 -> 32768 On node 0 totalpages: 32768 DMA zone: 32 pages used for memmap DMA zone: 0 pages reserved DMA zone: 4064 pages, LIFO batch:0 Normal zone: 224 pages used for memmap Normal zone: 28448 pages, LIFO batch:7 HighMem zone: 0 pages used for memmap DMI 2.2 present. ACPI: RSDP 000FDF50, 0014 (r0 Dell ) ACPI: RSDT 000FDF64, 0028 (r1 Dell G1 2 ASL 61) ACPI Warning (tbutils-0158): Incorrect checksum in table [RSDT] - 00, should be E4 [20070126] ACPI: FACP 000FDF8C, 0074 (r1 Dell G1 2 ASL 61) ACPI Warning (tbutils-0158): Incorrect checksum in table [FACP] - 00, should be 1E [20070126] ACPI Error (tbutils-0219): Null physical address for ACPI table [DSDT] [20070126] ACPI Error (tbutils-0219): Null physical address for ACPI table [FACS] [20070126] ACPI Warning (tbutils-0158): Incorrect checksum in table [FACP] - 00, should be 1E [20070126] ACPI: PM-Timer IO Port: 0x808 Allocating PCI resources starting at 10000000 (gap: 08000000:f7e00000) Built 1 zonelists. Total pages: 32512 Kernel command line: BOOT_IMAGE=Linux ro root=301 Enabling fast FPU save and restore... done. Initializing CPU#0 PID hash table entries: 512 (order: 9, 2048 bytes) Detected 348.945 MHz processor. Console: colour VGA+ 80x25 Dentry cache hash table entries: 16384 (order: 4, 65536 bytes) Inode-cache hash table entries: 8192 (order: 3, 32768 bytes) Memory: 120500k/131072k available (6111k kernel code, 10108k reserved, 1931k data, 344k init, 0k highmem) virtual kernel memory layout: fixmap : 0xfffea000 - 0xfffff000 ( 84 kB) pkmap : 0xff800000 - 0xffc00000 (4096 kB) vmalloc : 0xc8800000 - 0xff7fe000 ( 879 MB) lowmem : 0xc0000000 - 0xc8000000 ( 128 MB) .init : 0xc08de000 - 0xc0934000 ( 344 kB) .data : 0xc06f7f75 - 0xc08dabac (1931 kB) .text : 0xc0100000 - 0xc06f7f75 (6111 kB) Checking if this processor honours the WP bit even in supervisor mode... Ok. Calibrating delay using timer specific routine.. 698.57 BogoMIPS (lpj=1397148) Security Framework v1.0.0 initialized Mount-cache hash table entries: 512 CPU: After generic identify, caps: 0183f9ff 00000000 00000000 00000000 00000000 00000000 00000000 CPU: L1 I cache: 16K, L1 D cache: 16K CPU: L2 cache: 512K CPU: After all inits, caps: 0183f9ff 00000000 00000000 00000040 00000000 00000000 00000000 Intel machine check architecture supported. Intel machine check reporting enabled on CPU#0. Compat vDSO mapped to ffffe000. CPU: Intel Pentium II (Deschutes) stepping 02 Checking 'hlt' instruction... OK. ACPI: Core revision 20070126 ACPI Exception (tbxface-0618): AE_NO_ACPI_TABLES, While loading namespace from ACPI tables [20070126] ACPI: Unable to load the System Description Tables NET: Registered protocol family 16 PCI: PCI BIOS revision 2.10 entry at 0xfca8e, last bus=1 PCI: Using configuration type 1 Setting up standard PCI resources ACPI: Interpreter disabled. Linux Plug and Play Support v0.97 (c) Adam Belay pnp: PnP ACPI: disabled SCSI subsystem initialized libata version 2.20 loaded. usbcore: registered new interface driver usbfs usbcore: registered new interface driver hub usbcore: registered new device driver usb PCI: Probing PCI hardware PCI: Probing PCI hardware (bus 00) * Found PM-Timer Bug on the chipset. Due to workarounds for a bug, * this clock source is slow. Consider trying other clock sources PCI quirk: region 0800-083f claimed by PIIX4 ACPI PCI quirk: region 0850-085f claimed by PIIX4 SMB Boot video device is 0000:01:00.0 PCI: Using IRQ router PIIX/ICH [8086/7110] at 0000:00:07.0 ieee1394: Initialized config rom entry `ip1394' Time: tsc clocksource has been installed. PCI: Bridge: 0000:00:01.0 IO window: e000-efff MEM window: fc000000-feffffff PREFETCH window: f9000000-f9ffffff NET: Registered protocol family 2 IP route cache hash table entries: 1024 (order: 0, 4096 bytes) TCP established hash table entries: 4096 (order: 3, 32768 bytes) TCP bind hash table entries: 4096 (order: 2, 16384 bytes) TCP: Hash tables configured (established 4096 bind 4096) TCP reno registered apm: BIOS version 1.2 Flags 0x03 (Driver version 1.16ac) VFS: Disk quotas dquot_6.5.1 Dquot-cache hash table entries: 1024 (order 0, 4096 bytes) NTFS driver 2.1.28 [Flags: R/W]. JFS: nTxBlock = 942, nTxLock = 7536 SGI XFS with ACLs, security attributes, large block numbers, no debug enabled SGI XFS Quota Management subsystem OCFS2 1.3.3 OCFS2 Node Manager 1.3.3 OCFS2 DLM 1.3.3 OCFS2 DLMFS 1.3.3 OCFS2 User DLM kernel interface loaded GFS2 (built Jun 19 2007 15:21:53) installed io scheduler noop registered io scheduler anticipatory registered io scheduler deadline registered io scheduler cfq registered (default) Limiting direct PCI/PCI transfers. pci_hotplug: PCI Hot Plug PCI Core version: 0.5 isapnp: Scanning for PnP cards... isapnp: No Plug & Play device found Switched to high resolution mode on CPU 0 Real Time Clock Driver v1.12ac Serial: 8250/16550 driver $Revision: 1.90 $ 4 ports, IRQ sharing enabled serial8250: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A serial8250: ttyS1 at I/O 0x2f8 (irq = 3) is a 16550A Floppy drive(s): fd0 is 1.44M FDC 0 is a National Semiconductor PC87306 RAMDISK driver initialized: 16 RAM disks of 16384K size 1024 blocksize loop: loaded (max 8 devices) Compaq SMART2 Driver (v 2.6.0) HP CISS Driver (v 3.6.14) input: Macintosh mouse button emulation as /class/input/input0 Uniform Multi-Platform E-IDE driver Revision: 7.00alpha2 ide: Assuming 33MHz system bus speed for PIO modes; override with idebus=xx PIIX4: IDE controller at PCI slot 0000:00:07.1 PIIX4: chipset revision 1 PIIX4: not 100% native mode: will probe irqs later ide0: BM-DMA at 0xffa0-0xffa7, BIOS settings: hda:DMA, hdb:pio ide1: BM-DMA at 0xffa8-0xffaf, BIOS settings: hdc:DMA, hdd:pio Probing IDE interface ide0... hda: WDC WD800BB-00DKA0, ATA DISK drive ide0 at 0x1f0-0x1f7,0x3f6 on irq 14 Probing IDE interface ide1... hdc: TOSHIBA CD-ROM XM-6302B, ATAPI CD/DVD-ROM drive ide1 at 0x170-0x177,0x376 on irq 15 hda: max request size: 512KiB hda: 156301488 sectors (80026 MB) w/2048KiB Cache, CHS=16383/255/63, UDMA(33) hda: cache flushes supported hda: hda1 hda2 hda3 hdc: ATAPI 32X CD-ROM drive, 256kB Cache, DMA Uniform CD-ROM driver Revision: 3.20 ide-floppy driver 0.99.newide Loading iSCSI transport class v2.0-724. iscsi: registered transport (tcp) Loading Adaptec I2O RAID: Version 2.4 Build 5go Detecting Adaptec I2O RAID controllers... Adaptec aacraid driver (1.1-5[2423]-mh3) aic94xx: Adaptec aic94xx SAS/SATA driver version 1.0.3 loaded scsi: Detection failed (no card) sym53c416.c: Version 1.0.0-ac qlogicfas: no cards were found, please specify I/O address and IRQ using iobase= and irq= options<6>QLogic Fibre Channel HBA Driver iscsi: registered transport (qla4xxx) QLogic iSCSI HBA Driver Emulex LightPulse Fibre Channel SCSI driver 8.1.11 Copyright(c) 2004-2006 Emulex. All rights reserved. seagate: ST0x/TMC-8xx not detected. Failed initialization of WD-7000 SCSI card! PCI: setting IRQ 10 as level-triggered PCI: Found IRQ 10 for device 0000:00:0d.0 PCI: Sharing IRQ 10 with 0000:01:00.0 DC390: clustering now enabled by default. If you get problems load with "disable_clustering=1" and report to maintainers scsi2 : Tekram DC390/AM53C974 V2.1d 2004-05-27 megaraid cmm: 2.20.2.7 (Release Date: Sun Jul 16 00:01:03 EST 2006) megaraid: 2.20.5.1 (Release Date: Thu Nov 16 15:32:35 EST 2006) megasas: 00.00.03.10-rc1 Wed Feb 14 10:14:25 PST 2007 GDT-HA: Storage RAID Controller Driver. Version: 3.05 GDT-HA: Found 0 PCI Storage RAID Controllers 3ware Storage Controller device driver for Linux v1.26.02.002. 3ware 9000 Storage Controller device driver for Linux v2.26.02.008. nsp32: loading... ipr: IBM Power RAID SCSI Device Driver version: 2.3.1 (January 23, 2007) RocketRAID 3xxx SATA Controller driver v1.0 (060426) st: Version 20070203, fixed bufsize 32768, s/g segs 256 I2O subsystem v1.325 i2o: max drivers = 8 I2O Configuration OSM v1.323 I2O Bus Adapter OSM v1.317 I2O Block Device OSM v1.325 I2O SCSI Peripheral OSM v1.316 I2O ProcFS OSM v1.316 Fusion MPT base driver 3.04.04 Copyright (c) 1999-2007 LSI Logic Corporation Fusion MPT SPI Host driver 3.04.04 Fusion MPT FC Host driver 3.04.04 Fusion MPT SAS Host driver 3.04.04 usbmon: debugfs is not available 116x: driver isp116x-hcd, 03 Nov 2005 ohci_hcd: 2006 August 04 USB 1.1 'Open' Host Controller (OHCI) Driver USB Universal Host Controller Interface driver v3.0 PCI: setting IRQ 11 as level-triggered PCI: Found IRQ 11 for device 0000:00:07.2 PCI: Sharing IRQ 11 with 0000:00:11.0 uhci_hcd 0000:00:07.2: UHCI Host Controller uhci_hcd 0000:00:07.2: new USB bus registered, assigned bus number 1 uhci_hcd 0000:00:07.2: irq 11, io base 0x0000dce0 usb usb1: configuration #1 chosen from 1 choice hub 1-0:1.0: USB hub found hub 1-0:1.0: 2 ports detected sl811: driver sl811-hcd, 19 May 2005 Initializing USB Mass Storage driver... usb 1-2: new low speed USB device using uhci_hcd and address 2 usb 1-2: configuration #1 chosen from 1 choice usbcore: registered new interface driver usb-storage USB Mass Storage support registered. usbcore: registered new interface driver hiddev input: Logitech USB-PS/2 Optical Mouse as /class/input/input1 input: USB HID v1.10 Mouse [Logitech USB-PS/2 Optical Mouse] on usb-0000:00:07.2-2 usbcore: registered new interface driver usbhid drivers/usb/input/hid-core.c: v2.6:USB HID core driver PNP: No PS/2 controller found. Probing ports directly. serio: i8042 KBD port at 0x60,0x64 irq 1 serio: i8042 AUX port at 0x60,0x64 irq 12 mice: PS/2 mouse device common for all mice md: linear personality registered for level -1 md: raid0 personality registered for level 0 md: raid1 personality registered for level 1 md: raid10 personality registered for level 10 raid6: int32x1 83 MB/s raid6: int32x2 74 MB/s raid6: int32x4 82 MB/s raid6: int32x8 78 MB/s raid6: mmxx1 198 MB/s raid6: mmxx2 238 MB/s raid6: using algorithm mmxx2 (238 MB/s) md: raid6 personality registered for level 6 md: raid5 personality registered for level 5 md: raid4 personality registered for level 4 raid5: measuring checksumming speed 8regs : 607.000 MB/sec 8regs_prefetch: 554.000 MB/sec 32regs : 333.000 MB/sec 32regs_prefetch: 309.000 MB/sec pII_mmx : 878.000 MB/sec p5_mmx : 922.000 MB/sec raid5: using function: p5_mmx (922.000 MB/sec) md: multipath personality registered for level -4 device-mapper: ioctl: 4.11.0-ioctl (2006-10-12) initialised: dm-devel@redhat.com TCP cubic registered Initializing XFRM netlink socket NET: Registered protocol family 1 NET: Registered protocol family 17 Using IPI Shortcut mode input: AT Translated Set 2 keyboard as /class/input/input2 md: Autodetecting RAID arrays. md: autorun ... md: ... autorun DONE. EXT3-fs: INFO: recovery required on readonly filesystem. EXT3-fs: write access will be enabled during recovery. kjournald starting. Commit interval 5 seconds EXT3-fs: recovery complete. EXT3-fs: mounted filesystem with ordered data mode. VFS: Mounted root (ext3 filesystem) readonly. Freeing unused kernel memory: 344k freed shpchp: Standard Hot Plug PCI Controller Driver version: 0.4 i2c_core: exports duplicate symbol i2c_smbus_write_i2c_block_data (owned by kernel) Linux agpgart interface v0.102 (c) Dave Jones piix4_smbus 0000:00:07.3: Found 0000:00:07.3 device kobject_add failed for uhci_hcd with -EEXIST, don't try to register things with the same name in the same directory. [] kobject_shadow_add+0x101/0x1a0 [] mod_sysfs_setup+0x18/0xb0 [] sys_init_module+0x1147/0x15d0 [] syscall_call+0x7/0xb [] auth_unix_lookup+0x70/0x90 ======================= agpgart: Detected an Intel 440BX Chipset. agpgart: AGP aperture is 64M @ 0xf4000000 PCI: Found IRQ 11 for device 0000:00:11.0 PCI: Sharing IRQ 11 with 0000:00:07.2 3c59x: Donald Becker and others. www.scyld.com/network/vortex.html 0000:00:11.0: 3Com PCI 3c905B Cyclone 100baseTx at c88ae000. usbhid: exports duplicate symbol hiddev_hid_event (owned by kernel) Adding 489972k swap on /dev/hda2. Priority:-1 extents:1 across:489972k EXT3 FS on hda1, internal journal input: PC Speaker as /class/input/input3 parport0: PC-style at 0x378 (0x778) [PCSPP,TRISTATE,EPP] parport0: irq 7 detected lp0: using parport0 (polling). lp0: console ready Capability LSM initialized kjournald starting. Commit interval 5 seconds EXT3 FS on hda3, internal journal EXT3-fs: mounted filesystem with ordered data mode. usbhid: exports duplicate symbol hiddev_hid_event (owned by kernel) eth0: setting half-duplex. NET: Registered protocol family 10 lo: Disabled Privacy Extensions eth0: no IPv6 routers present usb 1-2: USB disconnect, address 2 usb 1-2: new full speed USB device using uhci_hcd and address 3 usb 1-2: configuration #1 chosen from 1 choice Linux video capture interface: v2.00 drivers/media/video/usbvideo/quickcam_messenger.c: Logitech Quickcam Messenger USB v0.01 usbcore: registered new interface driver QCM ISO 9660 Extensions: Microsoft Joliet Level 3 ISO 9660 Extensions: RRIP_1991A ip_tables: (C) 2000-2006 Netfilter Core Team